Friday, November 29, 2019

The Tempest - Barbarism Versus Civilization Essays - Caliban

The Tempest - Barbarism versus Civilization In Shakespeare's play, "The Tempest," an underlying theme of barbarism versus civilization appears. Shakespeare creates characters that exemplify symbols of nature or nurture. The symbolism of the characters is derived from their actions. These actions show Shakespeare's view of the uncivilized and the civilized, as well as help the reader develop his own opinion of each side. In this whimsical play, Prospero, the former Duke of Milan, after being supplanted of his dukedom by his brother, arrives on an island. He frees a spirit named Ariel from a spell and in turn makes the spirit his slave. He also enslaves a native monster named Caliban. These two slaves, Caliban and Ariel, symbolize the theme of nature versus nurture. Caliban is regarded as the representation of the wild; the side that is usually looked down upon. Although from his repulsive behavior, Caliban can be viewed as a detestable beast of nature, it can be reasonably inferred that Shakespeare's intent was to make Caliban a sympathetic character. During the first encounter, Caliban comes across very bestial and immoral. While approaching Caliban's cave, Prospero derogatorily says, "?[he] never/Yields us kind answer," meaning Caliban never answers respectfully. When Prospero reaches the cave, he calls to Caliban. Caliban abruptly responds, "There's wood enough within." His short, snappy reply and his odious tone, reveal the bitterness he feels from leading a servile life. Caliban's rudeness makes him seem like an unworthy and despicable slave. Also, Caliban displays an extreme anger toward Prospero. When Caliban is asked to come forth he speaks corruptly, "As wicked dew as e'er my mother brushed/With raven's feather from unwholesome fen/Drop on you both!?And blister you all o'er!" Caliban's attitude and disrespect is unfitting for a servant. However, his actions are justified. Until Prospero arrived on the island, Caliban was his own king. The island was left to him by his mother, Sycorax. Nevertheless, Prospero took charge of the isle and eventually enslaved Caliban. "?Thou strok'st me?I loved thee?" is part of a quote that illustrates Caliban's relationship with Prospero before he was his slave. Prospero comforted Caliban and gave him water and berries; he taught him how to speak, as well. During this time Caliban loved Prospero and showed him the features of the island, "The fresh springs, brine-pits, barren place and fertile?" Caliban regrets helping Prospero as he says towards the end of his speech, "Cursed be I that did so!" Caliban feels this way due to his imprisonment. However, Caliban was enslaved because he raped Prospero's daughter, Miranda. Rape appeals to the reader as a good cause for enslavement, but Shakespeare shows that Caliban deserves sympathy, instead of disgust. Caliban committed an illicit act that deserved punishment. However, he had not been nurtured by society and, therefore, did not know any better. It is his basic nature to do as he feels. He does not know the difference between right and wrong. The reader tends to feel sympathetic towards Caliban because he is punished and oppressed for conduct he could not control. Prospero says, "A devil, a born devil, on whose nature/Nurture can never stick?" which explains why even though Prospero taught Caliban the ways of civilized life, he still acted upon his natural instincts. Caliban still displays his natural behavior by being blunt and so-called detestable as a slave. Though, once the reader understands Shakespeare's intent, it can be inferred that Caliban is merely a sympathetic character who has lost his soul. He is helpless among the lives of the civilized, because civilized life is one he will never undertake. Caliban is a man of nature, but he should not be considered less honorab le than someone from civilization. Shakespeare portrays Caliban as a very ugly and crude looking beast, which is how people of nature are pictured by citizens of society. Caliban's appearance exemplifies the degenerate animal nature within him. However, Caliban has, what no man of society has, purity and innocence. Caliban acts not to please others but to make himself happy. He has an intuitive understanding of the natural world that brings out a sensitivity higher than that of the civilized. Shakespeare gives Caliban some of the finest poetry in the play,

Monday, November 25, 2019

Internet Intervention essays

Internet Intervention essays The Internet is a method of communication and a source of information that is becoming more popular among those who are interested in, and have the time to surf the information superhighway. The problem with much information being accessible to this many people is that some of it is deemed inappropriate for minors. The government wants censorship, but a segment of the population does not. Within this examination of the topic of, Government Intervention of the Internet, I will attempt to express both side s of this issue. During the past decade, our society has become based solely on the ability to move large amounts of information across large distances quickly. Computerization has influenced everyone's life. The natural evolution of computers and this need for ultra-fas t communications has caused a global network of interconnected computers to develop. This global net allows a person to send E-mail across the world in mere fractions of a second, and enables even the common person to access information worldwide. With th e advances with software that allows users with a sound card to use the Internet as a carrier for long distance voice calls and video conferencing, this network is the key to the future of the knowledge society. At present this net is the epitome of the F irst Amendment: freedom of speech. It is a place where people can speak their mind without being reprimanded for what they say, or how they choose to Recently, Congress has been considering passing laws that will make it a crime punishable by jail to send "vulgar" language over the net. The government wants to maintain control over this new form of communication, and they are trying to use the protect ion of children as a smoke screen to pass laws that will allow them to regulate and censor the Internet, while banning techniques that could eliminate the need for regulation. Censorship of the Internet threatens to ...

Thursday, November 21, 2019

Separation of powers in Malaysia and United Kingdom Essay

Separation of powers in Malaysia and United Kingdom - Essay Example House of Lords mainly consists of minorities of the hereditary peers which mainly are life members appointed by Crown and Archbishops and Bishops of the Church of England. Under the constitutional reforms of 2005, Lords of Appeal in ordinary who have been members of the House of Lords will no longer be entitled to further sit in the Lords. The judiciary includes the judges in the courts of law and those holding judicial offices in tribunals and the magistrates who work in the magistrate’s courts. Senior appointments to the judiciary are appointed by the Crown (Trone 312). The function of the judiciary is to interpret the legislation in line with the intention of the parliament and develop the common law. Under the constitution, the judges are subordinate to parliament and have no right to challenge the legislation of parliament like the validity of Acts of parliament. Judges are barred from vying for elective positions under the House of Commons disqualification act of 1975. T he Constitutional reforms act of 2005 criticized the work of the House of Lords chancellor sine he could appoint the judges and played a central political role in the government. Chancellor presided the House of Lords as the speaker therefore playing a legislative role. The roles were criticized since they contravened the doctrine of separation of powers by concentrating the executive, judiciary and parliamentary functions in one person. In the case of McGonnell V. United Kingdom (2000) the European court of human rights ruled that the right of fair trial was violated by participation of the Deputy Bailiff who was both a member of Court and member of the legislature at the same time. This saw the reformation of the office of the Lord Chancellor (Shar 45). Malaysia The government structure of... The paper tells that under the British constitution, there is no strict separation of powers but there is a system of check and balances which ensure the powers are not abused. The fundamental purpose of the doctrine of separation of powers is to ensure powers are not abused and the civil rights and liberties of the citizens are protected. Under a written constitution, the powers are distributed to the various institutions will be strictly defined. In United Kingdom, Judges in the high courts exercise their independence in according to Act of settlement 1700 which protects their tenure in office and guards their independence from executive and legislative influence. The judges enjoy immunity from legal proceedings in their functions even if they make defamatory statements during the court proceedings. In Malaysia, the judges do not exercise their judicial independence since they are appointed by the executive. The right to exercise their judicial powers in delivering the judgments ha s been limited by the constitution. Both countries have two levels of government. The separation of powers is clear in United Kingdom though it may be entrenched in the constitution. The separation of powers ensures each organ of government does not abuse its powers. In Malaysia, there is no separation of powers since executive is more powerful than the other arms of the government. The judicial independence and powers are limited by the constitution in Malaysia. In Malaysia, the parliament has been used to rubber stamp the decisions of the executive since the Prime Minister comes from the party with majority members in parliament.

Wednesday, November 20, 2019

Poem Research Paper Example | Topics and Well Written Essays - 250 words

Poem - Research Paper Example And luckily comes to an end. Just like the rest of the poem, woman in this stanza also gains some relieve for her weeping (Bogan). This stanza is powerful because it salutes and congratulates the less fortunate ones. E.g., the older wife â€Å"who has been cured of feeling unwanted† and soon is at home and becomes jubilant for this (Bogan). In general, this stanza shows that human beings live in quiet desperation where there are wrenching emotions, mental patients, and bizarre behavior have come a happy ending. This is seen in the last line of this stanza where this woman is given possible chances to meet new person and home to live in. The woman discussed in this stanza can be summarized as a being and metaphorically petrified (Bogan). In conclusion, this whole poem is made of mutual bonds that are found in modernism. This bond is found in various different types of work that was produced alongside other modernism examples. I, therefore, conclude that this poem is an ironically moving

Monday, November 18, 2019

Ford Explorer Defective Tires Essay Example | Topics and Well Written Essays - 1000 words

Ford Explorer Defective Tires - Essay Example It is imperative to note that it is both a legal and social obligations for companies to engage in such Cooperate Social Responsibility (CSR) activities. Consequently, most organizations focus on similar responsibility actions for example supporting activities that seem to protect the environment. In addition, there are many strategies, which companies employ in order to execute the above CSR phenomenon in a successful manner. For example, a business organization could opt to outsource a company, which in turn assists in the company’s societal responsibility. Alternatively, the company could include a permanent department in its structure. Such a permanent structure could perform all activities, which involve improving the public relations of the company. Evidently, the aim of most activities is to increase the individual company’s profits by improving its diverse public image. Finally, individuals who benefit from activities of corporate responsibility always aspire to engage in business deals with the respective companies hence the importance of CSR. According to Charles, & Hill, Carroll’s model is a detailed development of an early model of CSR by Sethi. Evidently, Carroll’s model gives a highlight of such facets of responsibility as economic, legal ethical and philanthropic orientations. Consequently, the above facets follow a universal pyramid of significance. Most reports indicate that in the past companies displayed bias in choosing the corporate responsibility activities hence the relevance of Carroll’s Model.

Saturday, November 16, 2019

Since X Ray Was Discovered Health And Social Care Essay

Since X Ray Was Discovered Health And Social Care Essay Since x-ray was discovered by Roentgen in 1895, its medical application has grown to be a fast and dynamic imaging modality. Todays imaging department consists of an impressive array of diagnostic and therapeutic devices from x-ray machines, CT Scan, PET Scan, linear accelerator, which mainly use ionizing radiation for diagnosis and treatment of illnesses; and with the addition of ultrasound and MRI that use sound waves and magnets for diagnosis instead of x-rays. Thus, radiology is considered as the window of the healthcare institution and the radiologic technologists are the persons behind these state-of-the art machines. In the x-ray department, one of the divisions of radiology department, the x-ray machines are used for diagnoses of illnesses. For 100 years the film-screen system has been the imaging system of choice. This system uses radiographic film, screen and wet chemistry to generate an image just like conventional photography. Every RTs goal is to provide high quality images for accurate diagnosis; therefore each step is very critical. The RT must be equipped with knowledge and skills from anatomy, positioning and exposure techniques. One slight mistake can imperil the image and yields an unacceptable radiograph which entails repeat examination that primarily means additional radiation dose to the patient. This is one of the disadvantages of a film-screen system wherein once the film has been processed; there is no way to alter it. What you see is what you get. Fortunately, with the growing technology of imaging modalities came the introduction of digital imaging which follow the same concep t as digital cameras wherein brightness and contrast of the image can be changed and images can now be cropped. Its advantage compared to film-screen is very obvious, since images can be altered, repeat examinations, oftentimes is no longer necessary. The technology is superb and its debut has grown the curiosity of every RT whether it is efficient compared to the traditional system. And of course, it is. However, as with every other technology has its drawback. Since the new technology primarily uses computer and computer-aided equipments oftentimes do the entire job. The question lies wherein will the competence of the RT in terms of exposure technique factors be same as using the conventional way? Several international studies stated that because of the convenience of the system, the RTs using the machine oftentimes fail to consider the standard protocols in every technique selection because images can be manipulated later. Alteration of images from time to time should not be a daily scenario because manipulation sometimes interfere accurate diagnosis. As of the researchers knowledge, there are no known local related studies in the decline of RTs competence in using CR. One of the reasons may be this modality is still in the stage of introduction in the Philippines and that its implication is not yet intensively studied. But this does not stop the researchers to seek of finding out if there is indeed a decline in RTs competence with the new system. This study is a comparative-correlational research in determining the level of radiographic competence between film-screen system and CR on exposure technique factor selection. The main objectives of the researchers are to compare if there is a significant difference in terms of radiographic competence in the RT who uses film-screen from CR and to determine if the respondents profile and agency has a significant relationship in terms of radiographic competence. Base on the result of the study, the researchers will be able to assess the essential skills needed for the profession. Technolo gy indeed has helped us in many ways. However, without the competence of the professional manipulating the equipment is futile. This means that the technologist who has the sole responsibility of manning the state-of-the art equipment should not rely from technology, instead technology should rely on them. REVIEW OF LITERATURE This study primarily aims to compare the level of radiographic competence on exposure technique factor selection between film-screen system and computed radiography (CR). Exposure technique factor selection is an important foundation for these two types of image receptor (IR) or imaging system. Image receptor is a device that converts x-rays into visible light. Competence should not vary whether the radiologic technologist (RT) is using the conventional or digital system, otherwise, it will defeat the intensive study of the exposure techniques during the undergraduate years. Furthermore, providing appropriate exposure techniques is paramount in the profession since these techniques also mean radiation dosage on the part of the patient. According to Fauber Johnston (2012), the radiographers actions at the control panel directly determine the nature and the make-up of the x-ray beam. This means that the selected exposure technique factor is directly proportional to patient dose. In ad dition, it is the responsibility of the radiographer to learn the philosophy, factors and methods that minimizes ionizing radiation exposure to the patient (Callaway, 1996). This also means that an RT is providing quality patient care when he/she gives an adequate and necessary amount of radiation to the patient. Competence in Radiologic Technologist Klemp (1980) defined competence as an underlying characteristic of a person which results in effective and/or superior performance on the job. A competent person is imbued with the right knowledge, skills and attitude on a particular task. Other authors define competence as a cluster or related knowledge, skills, and attitudes that reflects a major portion of ones job, which has a relationship in the performance on the job that can be measured with well-accepted standards, and that can be improved with training and development (Parry, 1996). In radiologic technology, for example, an newly licensed RT already possess cognitive and motor skills at an entry level, however, it can only be enhanced through proper and consistent training in a chosen specialized field during the course of his/her work as an RT. Knowledge, Skills, Attitude As mentioned, competence is a combination of knowledge, skills and attitudes. These components are essential as a whole because the absence of one component greatly affects ones performance. According to Dowd (1996), knowledge as part of competence includes theories and concepts which were gained as a result of the experience of performing certain tasks. Furthermore, in the field of radiologic technology he added that knowledge includes job-specific terminology, methods of organizing information and an understanding of principles and generalizations. On the other hand, Hans Reynold in 1928 defined skill as combined mental and physical qualities which make it useful to industry. Knowledge if combined with skills is important in the workplace. Furthermore, one cannot develop a skill without knowledge and at higher levels, knowledge are converted to skills (Klieme, 2004.) The last component that determines competence is the attitude. The attitude such as beliefs, values, traits, and motives is a part of competence because it indicates the persons response to a particular event or situation. Attitude refers to the predisposition or mental state of individuals/users towards a product, ideas, or attributes. It also implies on mental readiness on a particular object or his attributes toward an object or his preferences. (Hulse Dowd, 1996). In the field of radiologic technology, competence does not only mean that the RT is equipped with the knowledge and skills but RT is also imbued with the right attitude and judgment to provide each patient with quality care On Radiographic Competence In the field of radiologic technology, one aspect of the profession requires competent skills in radiographic exposure factor technique. The said competence is essential especially in the diagnostic x-ray imaging, wherein exposure factors are the key to accurate diagnosis and providing radiation dosage to minimum level. For 100 years, film-screen technique has been the method of choice in radiographic imaging (Bushong 2009). Film-screen system uses radiographic films, radiographic intensifying screens and wet chemistry to make the image visible. Furthermore, this conventional system should adhere to the standards of the darkroom requirements. Film-screen system has the same concept as a typical conventional camera. In a film-screen technique, radiologic technologist should be certain on the exposure factors to be applied in a particular exposure because improper selection of exposure factors can lead to overexposure or underexposure of the film. Overexposure or underexposure degrades image quality and therefore, it can lead to rejection of film, thus necessitates the need for repeat examination. Repeat examination provides unnecessary dose to the patient and additional costs to the department. On the other hand, as with the other innovations in technology, diagnostic imaging has shifted its course from conventional to digital. Computer applications are employed nowadays in diagnostic imaging modalities. An appropriate analogy that is easy for most people to understand is the replacement of typical film cameras with digital cameras: images can be taken, immediately examined, deleted, corrected, and cropped, and subsequently sent to a network of computers. Computed radiography system (CR) is an affordable solution to digital imaging. Instead of the film, CR employs an imaging plate to capture x-rays and makes it visible when the plate is scanned into a computer and digitized it. Once the image is converted to data, it can be recorded on a laser printed film or can be transmitted and stored digitally. It has special features like manipulation or enhancement of the image. Its specialized software is used to image viewing with enhanced functions similar to film-screen system, s uch as contrast, brightness, and zoom. (dicomsolutions.com, 2011). Computed radiography has practical technical advantages compared with conventional techniques, such as wide contrast dynamic range, post-processing functionality, multiple image viewing options, and electronic transfer and archiving possibilities. In this system, image quality can be achieved because of the post-processing techniques that are not possible with film-screen system. This system is convenient for the technologists because the RT can compensate for exposure technique inaccuracies by adjusting the technique during post-processing phase of the image rather than that time of exposure. In radiologic technology field, competence means that the RT is equipped with the knowledge, skills, attitude and judgment to provide each patient with quality care. According to Olavidez (2005), competence is essential in the field of Radiologic Technology because RT is a fast growing profession; RT deals with human lives and most of all, the RT curriculum is not enough to prepare the students to be equipped with the skills necessary for the profession especially in the special fields of radiologic technology. For an RT to become competent, he/she should have undergone formal educational background followed by specialized training in their chosen field that takes months. As an RT, he/she should have comprehensive knowledge and skills in patient care, radiologic procedures and radiation dosage. Exposure Technique Factors Exposure technique factors influence and determine the quantity and quality of x-radiation to which the patient is exposed (Bushong, 2009). Kilovolt peak (kVp), milliamperage (mA), exposure time and source-to-image distance (SID) are the principal exposure technique factors. Furthermore, the said factors also affect image quality. Milliamperage and exposure time are the exposure factors that affects the quantity of radiation. Milliampere is the measure of x-ray tube current, whereas milliampere-second (mAs) is the produce of exposure time and exposure tube current. They directly affect the optical density (OD) of the film. Optical density is the overall blackening of the film. The darker the film, the higher number of x-rays is given to the patient. The higher the number of x-rays that are the given to the patients, the greater the radiation dosage they receive. Source-to-image receptor distance also affects the quantity of the radiation. The closer the patient is to the x-ray source, the higher dosage the patient gets. For chest x-ray, the standard SID is 72 inches, while for the other x-ray examinations, the standard SID is 40 inches. Kilovoltage peak (kVp), directly affects the quality of radiation. kVp is the maximum electric potential that travels across the x-ray tube. Since kVp affects the quality of th e x-ray beam, it also affects the quality of the radiographic image. Kilovoltage directly affects contrast. Contrast is the variation of densities on the film. The advantage of using higher kVp is that the patient will receive lower dosage of radiation because it will not be absorbed. However, higher kilovoltage produces more scatter radiation, thus increases the transmission of x-rays to the image receptor and degrades image quality. The best techniques to prevent scatter radiation are using beam restrictors such as collimator to filter low energy x-rays and to cut-off low energy rays using radiographic grids. By employing beam restrictors and grid will enhance image contrast because scatter radiation will be prevented. Furthermore, scatter radiation will also provide unnecessary dose to the patient. Therefore, exposure technique factor selection is essential. To provide quality radiographs and to limit patients to radiation should be a goal for every RT. According to Bushong (2009), RTs are required to use their skills to produce the best possible image with single exposure (Bushong, 2009). Otherwise, repeat examination will provide unnecessary radiation dose to the patient. Therefore, it is necessary for the RT to be equipped with knowledge and skills to manipulate these exposure technique factors to produce desired optical density, contrast, and image detail on the finished radiograph. RT in Film-Screen System In conventional film-screen system, before each examination, the radiologic technologist must select the optimum radiographic technique factors- kVp, mA, and exposure time (Bushong 2009). There are many considerations to determine the value of each factor and they are complexly interrelated. Contrast and Density are the photographic factors of the radiograph and it functions to make the image visible. Visibility of image is important so that anatomical image will appear for proper diagnosis. After each exposure, there is no way to manipulate its contrast and density and thats what makes film-screen system difficult as inadequate contrast or density entails repeat examination. Since manipulation of the image is not possible in this system, the RT should be certain with the technique factors prior to the exposure; otherwise, miscalculations can result to underexposure or overexposure. In a film-screen system, overexposure and underexposure of the image is considered unacceptable becaus e the important structures are not visible and thus it is not a tool for proper diagnosis. In other words, image quality is dependent on exposure factors. RT in Computed Radiography In CR system, image quality is not dependent on exposure factors. Digital image is unrelated to dose, kVp becomes less important. Since, image quality is not dependent on exposure factors, image can be manipulated. In a conventional system, the film serves as both image acquisition and display medium. With CR, the image plate serves as the acquisition medium but does not display the image. Since these functions are separate in CR, the digital signal can be altered to compensate for underexposure or overexposure and an acceptable image can be displayed on the monitor (Shephard, 2003). With CR system, post-processing is possible that helps enhance image thus allowing the RT to alter image contrast and density. Since image can be manipulated or modified, underexposure or overexposure is no longer a problem with this system, because it can usually salvage variations from the optical technique, whereas technical error with a screen-film system often requires a repeat exposure (Pizzutiello , 1993; Cesar, 1997). Therefore, with CR, technical errors are eliminated because of exposure variances that are possible with salvageable results, assuming adequate kilovoltage is used (Ballinger, 1999). On Assessment of RT Competence In order to know the competence of a professional, assessment plays a vital role. Assessment is important so as to evaluate if the RT is still competent to do the job. Since we are in the era of rapid technology, it may come to a point that we will just put our confidence on computers rather than our competence. According to Olavidez (2005), competence is an observable ability and it can be measured against set of standards. Assessment of competence is a combined knowledge, skills, and attitudes that reflect the current work practice. Furthermore, it can bridge the gap between workplace requirements and standard. Selection of exposure technique factor is of extreme importance because RT deals with exposing patients to radiation. Exposure technique factor is equivalent to the quality and the quantity of radiation that exits the patient, therefore, the RT should be precise in giving exposure technique factors. Providing appropriate radiation dose is necessary to prevent the patients from the hazards of the ionizing radiation, therefore prior to the exposure of the patient, accurate exposure techniques should be practiced. The issue of providing accurate techniques lies in a digital system, wherein images can be manipulated during post-processing. According to Fredrick Walker (medicalimagingmag, 2008), a radiologic technologist at Sharp Rees-Stealy in San Diego, CA, he pointed out if the image is too dark, we can manipulate the image using post-processing techniques like windowing or shadowing or to adjust contrast without having to repeat the examination. Furthermore, since image can be manipul ated during post-processing, it can encourage complacency rather than accuracy with exposure techniques which can result in overexposed or underexposed images (Medicalxray, 2010). In addition, according to Enfinger (2012), that it is true that the image can be adjusted, however, it is not recommended because the raw data from the initial exposure will contain information from scatter radiation that degrades image quality even if it is manipulated later. According to Shephard (2003), it is likely that digital imaging will replace conventional screen-film radiography in many modern medical imaging centers in the near future. It has already been stated that even if the image can be manipulated during post-processing, this should not be a practice because somehow it can deteriorate image quality which results in inaccurate diagnosis. One retrospective analysis of patients who had undergone lumbar spine radiographs for the diagnosis of osteoporosis compare diagnostic accuracy with screen-film versus digital radiography. The authors suspected that bone mineral loss could be more easily visible with screen-film imaging due to the fact that image contrast cannot be adjusted with this modality, whereas CR (and DR) images undergo digital post-processing techniques to maximize contrast. This could result in misleading results that confound diagnostic strength in osteoporosis. Therefore, this is a challenge now for the RT to maintain their competence amidst the aid of technology. Competence of RT is the foundation of providing quality patient care by providing appropriate radiation dose for accurate diagnosis. Synthesis The focus of the literature and studies cited was the radiographic competence of RT between film-screen system and computed radiography and it is through this study that the researchers can identify and compare whether their competence will differ based on the image receptor that is being used. In addition, competence in exposure technique factors is essential because this will also mean radiation dose to the patient. It has already been affirmed that the concept has been there for the past few years and therefore the present study is certainly not a new concept. Nevertheless, the researchers deemed it necessary to conduct a study assessing the competence of the RT for the benefit of the institution where they belong because the researcher wants to propose a professional program that could strengthen the foundation of the RTs. It is also important for the school to offer the programs since almost the RT from the different hospitals in Davao City are products of this institution. This study is similar to the other studies cited in this section because it stated on the effects of digital imaging on the radiographic competence of the RTs. Furthermore, previous studies dealt with the effects of image manipulation on image quality and it indirectly link to the competence of the RTs. Conceptual Framework In this view, the researchers attempted to assess the level of radiographic competence of the RTs in terms of knowledge, skills and attitude. Through assessing the competence of the RTs, the researchers are able to determine the level of radiographic competence; their strengths and weakness of radiographic techniques. On the other hand, the researchers identified the factors that can affect their competence, such as the respondents demographic profile in terms of age, sex, number of years in service and educational attainment and the profile of institution such as agency and its classification are also considered. To have a vivid picture of the study, Figure 1 served as the research paradigm SCHEMATIC DIAGRAM Independent Variables Dependent Variables Factors Respondents Profile Age Number of years in service Agency Private Public Image Processing Film-Screen System Computed Radiography Level of Radiographic Competence Knowledge Skills Attitude Figure 1 Schematic Diagram showing the relationship between the independent and dependent variables STATEMENT OF THE PROBLEM The study aims to compare the level of radiographic competence in using a film-screen system and computed radiography on exposure technique factor selection; specifically it aims to answer the following questions: What is the respondents profile in terms of: Age Number of years in service What is the agency of the healthcare institutions in terms of: Private Public What is the level of the respondents radiographic competence in using film-screen system on exposure technique factor selection in terms of: Knowledge Skills Attitude What is the level of the respondents radiographic competence in using computed radiography on exposure technique factor selection in terms of: Knowledge Skills Attitude Is there a significant relationship between the respondents profile and the level of radiographic competence in terms of: Knowledge Skills Attitude Is there a significant relationship between the agency of healthcare institution and the level of radiographic competence in terms of: Knowledge Skills Attitude Is there a significant difference in the level of radiographic competence between film-screen system and computed radiography in terms of: Knowledge Skills Attitude HYPOTHESES There is no significant relationship between the respondents profile and the level of radiographic competence in terms of: Age Number of years in service There is no significant relationship between the agency of the healthcare institution and the level of radiographic competence in terms of: Public Private There is no significant difference in the level of radiographic competence between film-screen system and computed radiography in terms of: Knowledge Skills Attitude DEFINITION OF TERMS Accuracy- refers to the degree of conformity of a measured or calculated value to its actual or specific value. Computed Radiography- is an affordable solution of digital imaging system that uses a photostimulable phosphor as the image receptor. Digital Radiography- an all-digital technique in which x-ray absorption is quantified by assignment of a number to the amount of x-rays reaching the detector; this is also called as cassetteless system. Exposure- measure of ionization produced in air by x-rays or gamma rays. Exposure Factor Selection. It is the factor set by the radiographer (kVp, and mAs) to produce visibility of structures in the radiograph. Film Screen System- is the conventional image receptor that uses radiographic film, radiographic intensifying screen and wet chemistry to visualize the image in the radiograph. Image receptor- is a device that converts x-ray beam into visible image. Level of Radiographic Competence- refers to the measure of the level of competence of the radiologic technologist in achieving goals and objectives in providing quality radiographs with minimum radiation dose to patients. Private hospital- is a hospital owned by a profit company or a non-profit organization and privately funded through payment for medical services by patients themselves. Public hospital- is a hospital which is owned by the government and receives government funding. SIGNIFICANCE OF THE STUDY This study seeks to determine if there is a significant difference on the level of the respondents radiographic competence in exposure technique factor selection between film-screen system and computed radiography; and to determine if there is a significant relationship on the level of radiographic competence between respondents profile and agency. Based on the results of this study, the researchers can identify the strengths and weaknesses of the RTs and if it shows significant decline in the competence of the RT in the CR system, the researchers will propose an enhancement program for the professionals. The said program will also be a part of the Continuing Professional Education (CPE), and it will be added to the CPE units needed to renew RT licenses. This study will be most helpful to the radiology department of the hospital to enhance Health Care Delivery by limiting radiation dose to the patients. Furthermore, determining the attitude toward the imaging system will help the department to reevaluate the mental and the emotional state of the RTs. Mental and Emotional state of the RT are important since they are dealing with patients. It is the responsibility of the RT to render quality patient care by providing appropriate radiation dose. Furthermore, this study will also be of most helpful to the schools offering radiologic technology as to intensify the foundation of the students in terms of exposure technique factors. Based on the result of the study, there may be a need to revise the curriculum to further intensify the skills of the RT students. Computed Radiography is not a part of the standard RT curriculum, and it may be one factor that affects the decline of competence on the part of the professional as well as the students. Chapter 2 METHODOLOGY This portion discusses the research design used, the research locale where the study will be conducted, the description of samples and the sampling technique, the instrument used, the details of procedure and the statistical analysis to answer the research problem. Research Design The study will employ a comparative-correlational research. To determine the difference between the level of competence in film-screen system and computed radiography, comparative study will be used. Furthermore, to determine the relationship between the respondents profile and agency between the levels of the radiographic competence, correlational design will be employed. Setting The study will be conducted from the selected hospitals in Davao, Digos and Tagum City employing either film-screen system and computed radiography. The hospitals using film-screen system are the following: Alexian Brothers Health and Wellness Center, Km. 4, McArthur Highway, Matina, Davao City; Davao Regional Hospital, located at Apokon, Tagum City 8112 and Davao Del Sur Provincial Hospital which is located at Lapu-lapu St. Digos, City Davao Del Sur. On the other hand, the hospitals using the computed radiography system are the following: Davao Doctors Hospital (DDH), E. Quirino Ave., Davao City; Southern Philippines Medical Center (SPMC), J.P Laurel Ave., Bajada, Davao City and Davao Medical School Foundation and Hospital (DMSF), Medical Drive, Bajada, Davao City. Participants The respondents of the study are the Registered Radiologic Technologists and Associate X-ray Technologists coming from the selected hospitals in Davao City employing a film-screen and computed radiography system. Moreover, the qualified respondents should be at least six months in service at the time of the evaluation. Measures The research assessment is composed of four parts. The first part of the assessment consists of questions pertaining to the profile of the respondents and hospital. The second part consists of questions on the respondents level of knowledge on exposure technique factor selection. The questions are specifically structured in such a way that assesses the respondents acquired knowledge on technique selection. Based on the results, the attitude in terms of respondents response in both film-screen and CR system will be categorized as follows depending on their mean score: Points Obtained Qualitative Description 30-25 Very High 20-24 High 15-19 Moderately High 10- 14 Low 13- 0 Very Low INTERPRETATION The aforementioned assessment form that will be used as instrument of the study is constructed and designed by the researchers as to measure the basic knowledge in exposure technique factor selection regardless of the imaging system used. Its validity and reliability was attested by experts of the field. Moreover, the third part of the assessment is an actual evaluation wherein the respondents are observed during x-ray examination. They will be assessed in the actual selection of the exposure technique factor and the outcome of the image. The said assessment is a point system; the appropriate the RT performs in technique factor selection and the acceptable the image, the higher the points. Based on the results, the level of radiographic competence in terms of respondents skills will be categorized as follows depending on their mean score: Points Obtained Qualitative Description 10 Very high level of radiographic skills 7-9 High level of radiographic skills 4-6 Moderately low level of radiographic skills 1-3 Low level of radiographic skills Low level of radiographic skills means that the respondents were not able to perform the appropriate exposure techniques and came up with an unacceptable radiograph. Moderately low level of radiographic skills me

Wednesday, November 13, 2019

The Great Gatsby As A Satire Essay -- essays research papers

The Great Gatsby as a Satire   Ã‚  Ã‚  Ã‚  Ã‚  Satire is an implement used by authors to point out a flaw of society or group of people in general. There are different levels of satire that the author can use. For example, the author may employ a type a formal satire known as Juvenalian satire. Here, the writer points out a subject with anger and contempt for it in a bitter fashion. There is also the contrasting form of Juvenalian satire called Horatian satire. Here, the writer points out a subject with a gentleness and jovial tenderness. The second main type of satire is informal. This is the type of satire used in The Great Gatsby. Here, Fitzgerald uses Nick to point out the character's flaws and makes each person the butt of the witticism by what they themselves do. The supposed 'guests'; at all of Gatsby's parties are prime examples of satire in The Great Gatsby. Many people who attended the parties were never even invited. This disregard for propriety illustrates the crassness and thoughtlessness that seemed to run rampant among the rich and famous during the twenties. An example of carelessness is when a large group of people at one of the huge soirees, decides to continue the party in the massive, expensive fountain in Gatsby's lawn. They just jump right in and begin to dance without concern for their health, much less concern for the well being of the fountain. After the galas had died down, most of the participants went home, leaving a monstrous mess...

Monday, November 11, 2019

Energy Management Case Study: Siemens

In June 2009, Siemens took its effort in solar and wind to the next level by leading the Deserted initiative. This transcontinental project aims to generate solar power in North Africa, where it is most abundant, and then transport it to Europe. The project fits particularly well with Siemens because it requires not only experience in the primary wind and solar technology but also in the complementary technologies such as power grids and switchboard. Which have traditionally been strong business field for the company. Nuclear energy: 1.Nuclear reactors are the strongest power plants possible and the most economically feasible 2. Recently Siemens has taking up its nuclear activities anew and is expending to become involved in international agreements. With Siemens becoming a potential new partner in the Russian market that holds dozen of new sectors and china that have plans to have 100 new reactors in operation or under construction by 2020 Hydrophone: 1. Harnessing the power of ocea n waves has attracted significant attention since ocean cover 71% of the earth surface. 2.US department of energy established the hydrophone program, designed to conduct R&D that will improve the technical, societal and environmental benefits of hydrophone and provide cost competitive technologies. Geothermal power: 1. This technology has a major advantage that it can be installed wherever energy is actually needed. Geothermal plants require minimal fresh water and external fuel pupils, and due to their layout are highly scalable. Smart grids: 2. Smart grid technology seems to be a natural opportunity for Siemens, based on the company's long history with electronic technology and products.Wolfgang Then believes that the market for smart grids will increase due to climate change and economic stimulus programs. 4) Threats: 1) Carbon-based fuel amount to 39% of Siemens profits, facing the reality that fossil fuel are finite, supplies will eventually run out, it Just a matter of when. T he threat is that Siemens contingency plan in renewable energy consist of 11% of its profit. ) Alternative energy: Most alternative energy creation methods have one major drawback: they can generate energy only in places were natures provide the required energy input.Wind energy The size of the wind turbine is not scalable due to technological constraints. To increase capacity, multiple wind turbines there for must be spread out over large distance from one another. Densely populated urban areas do not have adequate space to house wind parks, and rural areas have expressed annoyance with the patterns and agriculture productivities. Wind turbines possess limited efficiency. Wind turbines require large and highly specialized assembly facilities. The first ever float turbines main concerns are the durability and maintenance of the equipment against aggressive environmental condition at sea. Siemens is considering to utilize its size, contingency, competency, and cutting edge technology to further increase its market share and global footprint in wind energy. The question is whether wind energy will turn out to be the leading alternative technology, and if it does, whether wind technologies alone can generate enough profit to keep Siemens aloft. Solar energy Like wind energy solar power most be extracted were it occurs naturally.Solar panels have a low efficiency. Reaching only about 25% under optimal laboratory conditions. Solar panels due too China has become the leader manufacturer of low-cost Combination of cheap labor and available industrial infrastructure; it drove prices Down by almost The method of disposing of nuclear waste in old caves and salt mind is not 100% safe, in addition there has been reports of increased leukemia rates in areas close to nuclear reactors, changes in the micrometer due to the vast amount of steam released into the atmosphere.Hydrophone: For the technology to work, the seashore needs to be flat with only a slight slope, and requi res long stretches of littoral waters. Also tide turbines are restricted to uninhabited beaches, since moving parts under the water surface, can create hazards for swimmers, water sports, and coastal ships. Some drawbacks to wave power include the efficiency of current application necessary resistance against hostile environment (storms and salt water corrosion), cost of electricity, possible impact on marine life, and hazards to shipping. ) Candidates such as geothermal energy and hydra power, not to mention next generation nuclear reactor have evolved quite rapidly in recent years and seem poised to pose a serious threat to wind and solar applications, Siemens most relied upon alternative energy source. 4) Siemens is considering multiple options as its gateway from the problem and has to place some significant bets. If Siemens bets badly, the company risks being relegated to the sidelines as newer, more innovator firms squeeze slower-moving incumbents out of the market.Ill) PEST A nalysts: 1) Political/Regulatory/Legal: l. Politician from the US and Germany 2 of the biggest industrialized countries in the world are supporting the development of alternative energy. II. A group of 20 Coos recommendations to 68 leaders in their 2008 climate policy: A paradigm shift to low technological innovation, this will open the door for new energy companies to enter the market Ill. Combined with a growing global awareness of the impact of green-house gases on climate change as well as increased concerns regarding energy security.Energy issues are now receiving renewed interest from government and corporation alike. IV. President Obama visited the wind-turbine blade factory in Fort Medicine, Iowa to show his support receiving importing political recognition. V. Producing industrial- call wind turbines requires large and highly specialized assembly facilities. The entry-level barriers are high. VI. The effort of Siemens research in nuclear energy were put on hold in the sass when the German government passed a law that would gradually withdraw the country from nuclear-power generation.However Germany is reconsidering this decision. The German parliamentary election 2009 spawned new hopes that the German nuclear industry might be revalidated. VI'. Russia, China and the US are in the market producing and licensing multiple new nuclear reactor (12, 100, 35 respectively) . VIII. Siemens was recently plagued by a bribery scandal and because the US and the EX. Have lows that make such business practice illegal, Siemens was sentenced to 1. 6 billion in finds by the German and the US authorities. However bribery is commonplace in countries such as Nigeria, Russia and China. ) Economic: l. The prices of oil have been trending upward in recent decades. Crude oil prices spiked at an old-time high of $145. 15 per barrel on July 3 2008(up from $50 only 18 month earlier). II. Solar panels have reached a production cost of less than $1 per k output. Ill. US are Jumpin g the band wagon partly because they believe that millions of new green Jobs may help to reduce high unemployment. ‘V. Chinese companies are entering strongly to the wind energy and solar market due to a combination of cheap labor and available industrial infrastructure.China drove prices of solar panels down by almost 50% from 2008 to 2009. V. The Obama administration set a side funding to build smart-grid technologies as part of its recent economic stimulus plan. 3) Social/Cultural: l. Social awareness of the impact of green-house gases on climate change as well as increased concerns regarding energy security. II. Burning of fossil fuel releases carbon dioxide(CO into the atmosphere, which has linked to global warming. In addition many cities have become contaminated by smoke and people are suffering health problems caused by increased pollution.Ill. US government believes that investing in alternative energy will create millions of new green Jobs. IV. Rural areas have expre ssed annoyance of the sound made by wind turbines as well as their interference with wildlife migratory patterns and agricultural productivity. V. Nuclear power has serious limitations issues include nuclear accidents like Coherently and Fuchsia and how to store nuclear products which can be harmful to any living organism. L. New alternatives-energy technologies are Wing to replace carbon-based fossil fuels. II.Better materials have enabled specialized companies to build ever-larger wind turbines and new improved solar panels though increasing efficiency and reducing cost. (example: the 3. 6 mm wind turbine, first-ever floating wind turbine, cost efficient Chinese solar panel, turnkey high-tech solar plants). Ill. R in various companies has spurred immense efforts to find optimal ways not Just to capture but also to store and distribute energy generated from natural resources. IV. US department of energy recently announced 40 million dollar in founding to support design and planning work for the Next Generation Nuclear Plant (NSP).V. Harnessing the power of the ocean waves has attracted significant attention since oceans cover 71% of the earth surface. Furthermore the US department of energy established the hydrophone program designed to conduct R that will improve the technical, societal and environmental benefits of hydrophone and provide cost competitive technologies. VI. The new smart grid technology include self-monitoring ND possibly self-repairing capabilities, smart sensors and meters, and a communication network similar to the internet. V) Competitive Analysis: 1) New Market Entrants: l. A paradigm shift to low carbon economy by 2050 has a potential to drive forward the next chapter of technological innovation, this will open the door for new energy companies to enter the market. II. Since the market of wind energy has high future potential new players are entering the competition most notably from china and In recent years China has become the leadin g manufacturer and global Japan. Ill. Exporter of low-cost solar panels. V.Concerning the nuclear energy I-J, Japan, Taiwan, south scoria and India are difficult market to inter because they possess their own technology and production capabilities and for security reasons. V. Start-ups are investing significant resources in R to engage in smart-grid technologies (2 of these start-ups, Grid Point and Silver Spring Network, have managed to raise $220 million and $170 million, respectively). 2) Supplier Power: l. Sound and wind will not cease to exist within a time frame significant to humanity.II. One of the attractions of wind power and solar turnkey COPS plans is that, once installed, the turbines need constant maintenance which means lucrative long-term service contrast for the original maker and installer of the equipment. Ill. Smart distribution will greatly reduce the current problems with power demands, and can serve to integrate both tradition and alternative energy into a com mon power supply and distribution network. 3) Buyer Power: K made this market perfectly competitive. II.Knowing that energy from carbon based fuel is still at disposal and at constant price competition in this market will remain high which will give consumer a buying power. 4) Product Technology Development: . Introduction off new 3. 6-Mm wind turbine featuring a 120-meter diameter rotor equipped with 58. 5-meter long rotor blades. First ever wind turbine off the coast of Norway II. The turnkey high-tech solar plans include SSP (concentrated solar power) and CISCO (integrated solar combined cycle system) plants. Ill. The next generation nuclear power plant (NSP). IV. Technologies in hydrophone (e. . , the Appeals Wave Energy Converter) to harness the power of ocean waves. V. The smart grids technologies that will help to avoid power outages, make the grid more reliable, reduce maintenance and save energy. VI. Craig Veneer a key figure in decoding of the human genome, actually view a lgae as the most promising path in renewable energy source. These microscopic plant cells are present in an infinite supply and can generate energy quickly effectively and in an environmental friendly manner. 5) Competitive Rivalry: l. Siemens leading competitors are ABA, GE and Lastly.Never less it is always intriguing to meet in the same room and talk about collaborative ways to improve worldwide energy efficiency. II. GE launched a multimillion dollar accommodation initiative to leverage its wide-ranging technological capabilities to address problem in he green-energy arena. Ill. Enron (Germany) and Vestals (Denmark) is the major competitor of wind energy in the U and GE in US. While China and Japan are also trying to enter the market in Asia. IV. Rivalry within the solar energy market is strong and almost perfectly competitive.V) Gap Analysis: 1) Customer Gap: One example of a customer gap that may be facing Siemens is when they introduce their floating wind turbine. This gap wi ll expand if the durability and maintenance costs exceed its value. Trying to close this gap Siemens is now testing this technology to evaluate whether it is feasible or not. 2) Provider Gap 1 (Listening Gap): Cutting down the number of sector from 1 dozen to Just 3 helped Siemens close down its listening gap by concentrating on fewer divisions, moreover the energy market is a very complicated buyer and seller will exchange all the details before the buying process is done.It's so difficult to find a listening gap in this market. 3) Provider Gap 2 (Design & Standards Gap): understand customer requirements and the presence of upper management in all transactions ( buying and selling ) to improve focus on customer requirements 4) Provider gap 3 (performance ) Turnkey COPS plants and wind turbines need a long term service provider for Constant maintenance. Siemens will try to narrow this gap by providing a on-duty engineers to maintain a standard in all its plants.In addition working o n the new developed Smart-grid will help ensure a positive outcome and narrow this Gap. 5) Provider Gap 4 (Communication Gap): Siemens claimed to be the only company worldwide that support customers with efficient products, solutions, and know-how along the entire chain of energy conversion from the production of oil and gas to power generation and the transmission and distribution of electrical energy. To narrow its communication AP Siemens must maintain these standards and deliver a price competitive product and services.VI) Alternative Courses of Action: The question raised by Siemens is what to do and where to invest? Do they try to improve their current alternative energy projects? Or try to expand to different sources? Will it be efficient to invest in new alternatives source or acquire smaller companies with innovative technologies and promising market segment? 1) Alternative one: Increase investment in research of the algae plant that shows a promising path. Disadvantages: i t might turn out to be Just rubbish and all investments made could e lost.Advantages: Siemens could be a first mover in this field of renewable efficient and environmental friendly energy source, which could change the world as we know it. 2) Alternative two: Increase further its footprint in the wind market by introducing multiple giant and floating turbines. Disadvantages: it might turn out to be inefficient compared to its coast and maintenance and another first mover in some other field might be more efficient and resourceful. Advantages: by increasing its footprint in the wind market Siemens will remain the only leader and increase its market share. Alternative three: Giving wind energy its rightful share but increasing investment in solar panels by acquiring new research companies that are currently working on making new improvement in the solar business one kind has a (microscopic forest) that collects liquid water to produce steam. Advantages: Siemens will insure that the in vestment will pay off on the long run knowing that the sun is there for another 5 billion years. Disadvantages: the initial gains on this technology might not be realized under the Siemens name. W) Recommended Course of Action: Our recommendation lies on the 3rd alternative.VIII) Reason for Choice: By giving wind energy its rightful share and nuclear power a miner share, focusing on solar source innovation is a very desirable choice knowing that first sun is infinite secondly solar panels are very cost efficient which will give a higher ROE than any other source of energy and finally it is environmental friendly and social acceptable. Recommendations: a. What should be done? Siemens should retain all its work flow and progress but focus more on energy coming from the sun as this energy will be the a panacea for the world's economy as well as environmental concerns.

Friday, November 8, 2019

Smart Cities Essays - Ministry Of Urban Development, Free Essays

Smart Cities Essays - Ministry Of Urban Development, Free Essays Ministry of Urban Development Government of India June 2015 Smart Cities Mission Statement & Guidelines Government of India Ministry of Urban Development (June, 2015) Contents 1. The Challenge of Urbanization 5 2. What is a smart city 5 3. Smart City Features 7 4. Coverage and Duration 7 5. Strategy 8 6. Proposal Preparation 9 7. Smart Cities Selection Process 10 8. How Many Smart Cities in Each State/UT? 11 9. The Process of Selection of Smart Cities 11 10. Implementation by Special Purpose Vehicle (SPV) 12 11. Financing of Smart Cities 13 12. Funds Release 14 13. Mission Monitoring 15 14. Convergence with Other Government Schemes 17 15. Challenges 18 Annexures Annexure 1: Scope of work for the Smart City Consulting Firm 21 Annexure 2: Number of cities allocated to States based on urban population and number of statutory towns 23 Annexure 3: Challenge Stage 1: Preconditions and Documents to be submitted by each State 25 Annexure 4: Challenge Stage 2: Criteria and Indicative Table of Contents 33 Annexure 5: Structure and Functions of SPV 37 Annexure 6: Utilization Certificate Format 41 Annexure 7: Score Card for Smart Cities 42 5 Smart Cities Mission 1. The Challenge of Urbanization 1.1 Cities are engines of growth for the economy of every nation, including India. Nearly 31% of Indias current population lives in urban areas and contributes 63% of Indias GDP (Census 2011). With increasing urbanization, urban areas are expected to house 40% of Indias population and contribute 75% of Indias GDP by 2030. This requires comprehensive development of physical, institutional, social and economic infrastructure. All are important in improving the quality of life and attracting people and investments to the City, setting in motion a virtuous cycle of growth and development. Development of Smart Cities is a step in that direction. 2. What is a smart city 2.1 The first question is what is meant by a smart city. The answer is, there is no universally accepted definition of a Smart City. It means different things to different people. The conceptualisation of Smart City, therefore, varies from city to city and country to country, depending on the level of development, willingness to change and reform, resources and aspirations of the city residents. A Smart City would have a different connotation in India than, say, Europe. Even in India, there is no one way of defining a Smart City. 2.2 Some definitional boundaries are required to guide cities in the Mission. In the imagination of any city dweller in India, the picture of a Smart City contains a wish list of infrastructure and services that describes his or her level of aspiration. To provide for the aspirations and needs of the citizens, urban planners ideally aim at developing the entire urban eco-system, which is represented by the four pillars of comprehensive development institutional, physical, social and economic infrastructure. This can be a long term goal and cities can work towards developing such comprehensive infrastructure incrementally, adding on layers of smartness. 2.3 In the approach to the Smart Cities Mission, the objective is to promote cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment and application of Smart Solutions. The focus is on sustainable and inclusive development and the idea is to look at compact areas, create a replicable model which will act like a light house to other aspiring cities. The Smart Cities Mission of the Government is a bold, new initiative. It is meant to set examples that can be replicated both within and outside the Smart City, catalysing the creation of similar Smart Cities in various regions and parts of the country. 2.4 The core infrastructure elements in a Smart City would include: i. adequate water supply, ii. assured electricity supply, iii. sanitation, including solid waste management, 6 iv. efficient urban mobility and public transport, v. affordable housing, especially for the poor, vi. robust IT connectivity and digitalization, vii. good governance, especially e-Governance and citizen participation, viii. sustainable environment, ix. safety and security of citizens, particularly women, children and the elderly, and x. health and education. 2.5 As far as Smart Solutions are concerned, an illustrative list is given below. This is not, however, an exhaustive list, and cities are free to add more applications. 2.6 Accordingly, the purpose of the Smart Cities Mission is to drive economic growth and improve the quality of life of people by enabling local area development and harnessing technology, especially technology that leads to Smart outcomes. Area-based development will transform existing areas (retrofit and redevelop), including slums, into better planned ones, thereby improving liveability of the whole City. New areas (greenfield) will be developed

Wednesday, November 6, 2019

Tulsa Race Riots essays

Tulsa Race Riots essays World Book Encyclopedia conspicuously fails to mention the Tulsa Race Riot of 1921 in any of its entries; readers wont find it under Oklahoma, Tulsa, or riots (Black Wall Street). It did happen, though. For many victims, the Tulsa Race Riot is very much a reality still today. Their lives were forever changed on May 31, 1921. On this day, 19-year-old black man, Dick Rowland, was arrested and accused of trying to rape a white female elevator operator, Sarah Page, in Tulsas Drexel Building. The local newspaper, the Tulsa Tribune, reporting on the story, inflamed area residents by declaring that Rowland had attacked Page and torn her clothes. On the back page, the Tribune carried an editorial with the headline, To Lynch Negro Tonight, in which it talked about the fact that mobs of Whites were forming in order to lynch the Negro (Carrillo). White men soon began showing up outside the courthouse carrying guns and drinking liquor and demanding that Rowland be handed over. But local African American World War I veterans had weapons of their own, and they came to protect Rowland. After a single gun fired inadvertently, riot ensued. Thousands of Whites raided the 35-square block Greenwood district of Tulsa, looting and destroying over 1200 homes, 35 grocery stores, eight doctors offices, and five hotels. Different accounts estimate the number of lives lost anywhere between 300 and 3000, with property damages estimating $1.8 million in 1921- a sum that would amount to over $16 million today (Carrillo). The Tulsa Race Riot was many things. It was Yellow Journalism at its worst. It was mob mentality at its strongest. And it was the reaction of a jealous white population to the extremely affluent Black Wall Street, as it was called. Was it terrorism, though? That is an issue of literary particularities and little else...

Monday, November 4, 2019

Helen Gurley Brown and Second Wave Feminism Essay

Helen Gurley Brown and Second Wave Feminism - Essay Example The second wave feminism battled against domestic violence, giving proposals on the establishment of marital rape laws, divorce laws and establishing shelters for battered women. As put by Scanlon, it was a movement of obsession with â€Å"women’s professional opportunities† and â€Å"about their dating prospects† (2009, x). It is believed to have ended in the early 1980s, paving way for third-wave feminism. The work and life of Helen Gurley Brown was observed as being impertinent and daring. It entailed a celebration of feminism and the sexual practices that women enjoyed, thus giving an appropriate understanding of the second wave movement and further providing a vantage point to view the third wave feminism. Born in 1922 in Green Forest, Arkansas, Brown never noticed as she inherited some aspects of her young life and traditions (Scanlon 2009, 1). Her father died when she was young, something that caused her mother a lot of bitterness, claiming that the husban d had enslaved her through motherhood and marriage and later left her alone even after she had quit her job to undertake these responsibilities. The realization of her mother’s feelings opened up Brown to feminism (Scanlon 2009, 11). She grew up to author an international best-seller in 1962 titled, Sex and the Single Girl. Additionally, she became the editor of Cosmopolitan magazine for over thirty years, giving her audience articles such as â€Å"if you're not a sex object, you're in trouble† and â€Å"good girls go to heaven, bad girls go everywhere† that brought out her feminist ideologies. Even so, Brown faced criticisms from various second wave feminists with regard to the messages carried in her books and the Cosmopolitan. First, Brown was criticized of focusing on her individuality as opposed to the group identity of the body of women. Having come from a background of no education and poverty, Brown worked herself up the economic ladder and secured herse lf employment. She did not allow herself to be held back by structural barriers which she fought against on her way up from a secretary to a copywriter and further to a popular magazine editor (Scanlon 2009, 25). She did not prescribe to overthrowing systems but working towards change. This saw her succeed in her career at Cosmopolitan, earning her a loyal movement of women who prescribed to her philosophies. The women and men equality that Brown prescribed to differed from what other feminists taught. Brown believed that the equality of women to men was in the sexual desire of women. She further alluded to their right to be sexual whether outside or inside marriage. In Cosmopolitan, Brown wrote articles promoting not just economic access equality but also sexual freedom equality. She was an ardent supporter of the Equal Rights Amendment, ERA alongside her support for rights to abortion (Scanlon 2009, 256). The second-wave feminists considered men in the then patriarchal society as enemies because they limited opportunities for women. These men took advantage of the caring and nurturing nature of women to confine them to motherhood, denying them their chances in the professional world. These feminists perceived marriage and children as tools used by men to oppress women. On the contrary, Brown did not consider men as enemies, choosing to perceive women as being equal to men in all aspects including their ability to abuse power and playing the games men play in dating. She was therefore criticized of having been absorbed into a system that was oppressive to women. However, Brown argued that she was being a realist and appreciated that if men made rules, then women should have

Saturday, November 2, 2019

Nightingale's Nursing Theory Essay Example | Topics and Well Written Essays - 1000 words

Nightingale's Nursing Theory - Essay Example Her work and contribution to the nursing profession and medical care started thereof. As a reformist and a nurse, she became active in reforming the laws for the poor and was adamant in changing the conditions of the abysmal infirmaries or hospitals of that time. Among her most famous contribution was at the Crimean War. Ford (n.d.) discloses that Nightingale together with a group of nurses headed on to Turkey to help in the terrible conditions of the wounded British soldiers. With Nightingale's leadership, the nurses worked relentlessly to improve the living conditions of the wounded soldiers. It was in that same time that she was famously dubbed as "The Lady with the Lamp" by the British soldiers as she worked day in and day out to help them. She was also the first person to use statistics in the medical studies such as the high child mortality of those times. Nursing theories are the concepts and theories behind the nursing practice. Technically, Florence Nightingale never constructed a nursing theory, but her works and journals during her lifetime were treated by her predecessors as such. Her contemplations and deliberations on the apt standards of nursing were exquisitely described in her work entitled "Notes on Nursing: What it is and what it is not." Here, Nightingale's (1860) theory on nursing evolves around the concept that the patient's recovery is highly related to the conditions of his environment. The environment of a patient has a direct effect on his recovery or his deterioration. According to Nightingale, "Nature alone cures." With that she stresses on the healing properties of the physical environment of the patient; fresh air, light, warmth, cleanliness and a suitable diet. The environment not only refers to the physical aspect but also to the psychological and social environment surrounding the patient. Healthy communication with the patient and healthy environment keeps the patient's mind active and stimulated. Here Nightingale stresses that communication should be soothing and a form of therapeutic aid to the patient's suffering. How the nurses interact with the patient, may it be verbally or non-verbally also plays a role in the patient's recovery. They were to give comfort and ease the patient's suffering. She adds that there is a need for social awareness or social education on the disease of the patient, his family or the immediate people of that environment. The primary purpose of Florence Nightingale's nursing theory is to give nursing professionals indications on how to be effective in their chosen career. That is, nurses are there to control the environment and give the patients their basic needs to aid patients in their healing process and achieving their former strength. Nurses are not only to be focused on controlling the environment for the patient, but also in disseminating helpful information about the important aspects of the disease to the patient, the family and immediate community. Within Nightingale's nursing theory are the assumptions that are significant to applying the theory. First and foremost, Nightingale stresses on the need to understand that a disease is a reparative process. An inflicted goes through the natural healing process and those sufferings are indications of the body healing itself. The patient then